Dual Relay Control4 Driver

Perfect for controlling and monitoring devices that use one relay for on and one for off.

MSRP: $40 USD
Login to view pricing

Our Dual Relay Control4 Driver is perfect for those instances where you have a garage door or other device that uses one relay for open and another relay for close. Make your connections to each and hook up whatever sensor driver you'd like to use for the icon on the GUI.

Works great for dual relay devices such as:

  • Commercial Garage Doors
  • Gates
  • Shades and Blinds
  • Pumps

 

Driver License:  Site (one required per project)

v10
- Add support for OPEN and CLOSE commands from programming

v9
- Added TRIGGER Command.

v8
- Added licensing.

v1
 - Initial Release

-------------------------------------------------------------------------------------------
OVERVIEW
-------------------------------------------------------------------------------------------
Dual Relay Sensor Driver. After adding the driver to your project, add a generic relay or motor as well.
It does not matter which, however, your selection will determine which icon is shown on the navigator interface. For our example, we will be adding an electronic gate. Now enter the 'Connections' tab to link everything together.

Under Connections, click the driver, where you will find the following:

Relay For Open --------- Link this to the relay used for opening, ex: HC800 - Relay 1
Relay For Close --------- Link this to the relay used for closing, ex: HC800 - Relay 2
Contact Sensor --------- Link this to the contact sensor, ex: HC800 - Contact 1

Relay Interface --------- Link this to the generic relay or motor you created earlier, for example, our electronic gate.

The generic relay is now connected to the dual relay and sensor driver. It will show underneath Motors/Sensors on the navigator interface.

Clicking it will toggle between the open and close relays, and its icon will reflect the contact sensor status.
-------------------------------------------------------------------------------------------
PROPERTIES
-------------------------------------------------------------------------------------------
Pulse Time: Integer

-------------------------------------------------------------------------------------------
Copyright 2017, HouseLogix, Inc.
All Rights Reserved