Inaxsys NVR

Integrate Inaxsys NVR with Control4.
Login to view pricing


Buy 10, get 1 copy free!  11 copies for the price of 10!

This is a driver pack to integrate Inaxsys NVR with control4.  

The driver supports motion detection, if enabled on the camera, to trigger events on the Control4 system.

o Support for MJPEG and H.264 video feeds
o Supports Basic authentication
o Loads basic driver meta data into control4 Composer Pro
o Allows automated reboots of the camera
o Home is set to preset1
o Supports jumping to 6 presets
o Supports motion detection events if enabled on the camera



Driver License:  Site (one required per project)

07/06/17 - 1.0.0 - Initial Release 

1. Log into your NVR
2. Select setup
3. Under the Camera section select video
4. Under the main stream configure the following

a. Code-stream Type: General
b. Encoding Mode: H.264B
c. Resolution: 720P
d. Frame Rate: 10
e. Bit Rate: VBR
f. Set a watermark if you would like to

5. Enable the sub stream and configure it for MJPEG

a. Code-stream Type: General
b. Encoding Mode: MJPEG
c. Resolution: VGA
d. Frame Rate: 10
e. Bit Rate Control: CBR
f. Bit Rate: 1280