KT&C IP Camera Control4 Driver License

Partner: HouseLogix
Integrate a multitude of KT&C IP Cameras and Holovision Network-based Door Stations into Control4 with this powerful driver. (Per device license)

Save on the combo when you add a compatible camera to your cart (discount reflected at checkout).

MSRP: $60
Login to view pricing

Using the new Control4 IP Camera Proxy, dealers now have access to an exciting line-up of KT&C IP Cameras and Holovision Network-based Door Stations. Note: this license is valid for one camera/device.

Driver Features:

  • Support for MJPEG and H.264 video feeds
  • Authentication is allowed and recommended
  • Programmatically change the following:
    • Contrast
    • Saturation
    • Brightness
    • Date Enabled
    • Clock Enabled
    • Text Enabled
    • Text Message
    • Exposure Mode
    • Exposure Max Gain
    • Shutter Speed
    • Day and Night Mode
    • Anti-Flicker
    • Digital Noise Reduction
    • Status LED Enabled
    • Status LED Flash/Blink Enabled
  • View the camera MAC address, firmware version, and serial number in Composer properties

Driver License:  Device

KTNC IP Camera
Driver Version: [v1.0 rev20140718]
-------------------------------------------------------------------------------------------
ONLINE DOCUMENTATION
-------------------------------------------------------------------------------------------

Online Documentation: https://www.houselogix.com/
Technical Support Site: http://support.houselogix.com

-------------------------------------------------------------------------------------------
OVERVIEW
-------------------------------------------------------------------------------------------
This driver integrates the KTNC IP Camera into your Control4 system. This driver is a device license,
and as such, requires a license key for each individual camera. Add this driver to your project,
and enter the License Key, IP Address, and Username/Password Properties.

This driver supports SNAPSHOT, MJPEG, and H264 streams.

-------------------------------------------------------------------------------------------
PROPERTIES
-------------------------------------------------------------------------------------------
License Key:
Enter your license key.

License Status:
License activation status.

MAC Address:
Camera MAC Address.

Firmware Version:
Camera firmware version.

Serial Number:
Camera serial number.

Version Status:
Driver version status.

-------------------------------------------------------------------------------------------
ADDTIONAL CAMERA SETTINGS
-------------------------------------------------------------------------------------------
These features are exposed in the driver on both the Properties tab and as Device Specific Commands,
to be used in Control4 programming. This allows you to create dynamic alterations to the camera image
appearance and write text messages on the image.

Contrast:
1-128

Saturation:
1-255

Brightness:
1-255

DateEnabled:
Yes/No

ClockEnabled:
Yes/No

TextEnabled:
Yes/No

TextMessage:
String, no spaces allowed. Use '_' instead.

ExposureMode:
Auto/Manual.

ExposureMaxGain:
If ExposureMode is Manual, this setting applies.
30, 36, 42, 48, 54, 60

ShutterSpeed:
If ExposureMode is Manual, this setting applies.
1/8000, 1/1024, 1/960, 1/480, 1/240, 1/120, 1/100, 1/60, 1/50, 1/30, 1/25, 1/15, 1/7.5

DayAndNightMode:
Auto/Color/BlackAndWhite

AntiFlicker:
50/60

DigitalNoiseReduction:
Auto/1-6

StatusLEDEnabled:
Yes/No

StatusLEDFlashEnabled:
Yes/No