Ubiquiti mFi Control4 Driver

Our Control4 driver allows you to easily integrate with the complete line of Ubiquiti power products. Works with in-wall outlets as well as power strips.

MSRP: $189
Login to view pricing

Overview:

This driver integrates flawlessly with the Ubiquiti line of products allowing full control via Control4.

Compatible Ubiquiti Products:

Ubiquiti mFi WiFi Outlet

This driver integrates the Ubiquiti mFi WiFi Outlet with Control4 projects. Individual outlet control, as well as, energy monitoring capabilities are exposed.

Features

  • Allows for remote monitoring and control of connected devices
  • Wi-Fi networking capabilities for remote access across an IP network
  • Monitoring of energy usage and automation through Control4

Quick Install

  • First install and setup your outlet.
  • Once properly configured, add this driver to your project.
  • Enter the IP address of your outlet, username, and password on the Properties tab.
  • The driver will then exposes 2 relay bindings.

-----------------------------------------------------------------------------------------------

Ubiquiti mFi mPower PRO Powerstrip

This driver integrates the Ubiquiti mFi mPower PRO with Control4 projects. Individual outlet control, as well as energy monitoring capabilities are exposed. 

Features

  • Allows for remote monitoring and control of connected devices
  • Wi-Fi networking capabilities for remote access across an IP network
  • Monitoring of energy usage and automation through Control4

Quick Install

  • First, install and setup your power strip according to the mPower PRO Quick Start Guide provided with the device.
  • Once properly configured, add this driver to your project.
  • Enter the IP address of your outlet, username, and password on the Properties tab.
  • The driver will then expose 8 relay bindings.

Driver License:  Site (one required per project)

v1.3 20151105

  • Driver now updates relay proxies on poll response to reflect the present ON/OFF state.

Ubiquiti mFi-MPW WiFi Outlet

------------------------------------------------------------------------------------------

 OVERVIEW

------------------------------------------------------------------------------------------

This driver integrates the Ubiquiti mFi WiFi Outlet with Control4 projects. Individual outlet control, as well as, energy monitoring capabilities are exposed. First, install and setup your outlet. Once properly configured, add this driver to your project. Enter the IP address of your outlet, username, and password on the Properties tab. The driver exposes 2 relay bindings.

------------------------------------------------------------------------------------------

PROPERTIES

------------------------------------------------------------------------------------------

IP Address: IP Address of outlet.

Username: Username for login to outlet.

Password: Password for login to outlet.

POWER: Display power in Watts

ENERGY: Display energy usage in kW*h. This value is accumulative.

CURRENT: Display current in amps

VOLTAGE: Display voltage.

POWER FACTOR: Display power factor.

POLLING FREQUENCY: Polling frequency, in seconds.

------------------------------------------------------------------------------------------

 PROGRAMMING

------------------------------------------------------------------------------------------

The following commands may be used in conjunction with a relay to alter its state.

- TOGGLE

- OPEN

- CLOSE

------------------------------------------------------------------------------------------

VARIABLES

------------------------------------------------------------------------------------------

POWER_#(NUM/STR):

Number and string format, power in watts.

ENERGY_#(NUM/STR):

Number and string format, energy in kW/h.

CURRENT_#(NUM/STR):

Number and string format, current in amps.

VOLTAGE_#(NUM/STR):

Number and string format, voltage. 

PWRFACTOR_#(NUM/STR):

Number and string format, power factor.

STATUS_MESSAGE_#(STR): 

Display the power, energy, current, voltage, and power factor of selected sensor. 

------------------------------------------------------------------------------------------

Ubiquiti mFi mPower PRO Powerstrip

Driver Version: [v1.0 rev20150121]

-------------------------------------------------------------------------------------------

OVERVIEW

-------------------------------------------------------------------------------------------

This driver integrates the Ubiquiti mFi mPower PRO with Control4 projects. Individual outlet control, as well as energy monitoring capabilities are exposed. First, install and setup your power strip according to the mPower PRO Quick Start Guide provided with the device. Once properly configured, add this driver to your project. Enter the IP address of your outlet, username, and password on the Properties tab. The driver exposes 8 relay bindings.

-------------------------------------------------------------------------------------------

PROPERTIES

-------------------------------------------------------------------------------------------

IP Address:

IP Address of outlet.

 

Username:

Username for login to outlet.

 

Password:

Password for login to outlet.

 

POWER:

Display power in Watts.

 

CURRENT:

Display current in amps.

 

VOLTAGE:

Display voltage.

 

POWER FACTOR:

Display power factor.

 

POLLING FREQUENCY:

Time between refreshing the properties (seconds).

-------------------------------------------------------------------------------------------

PROGRAMMING

-------------------------------------------------------------------------------------------

The following commands may be used in conjunction with a relay to alter its state.

 

- TOGGLE

- OPEN

- CLOSE

-------------------------------------------------------------------------------------------

VARIABLES

-------------------------------------------------------------------------------------------

 POWER_#(NUM/STR):

Number and string format, power in watts.

 

CURRENT_#(NUM/STR):

Number and string format, current in amps.

 

VOLTAGE_#(NUM/STR):

Number and string format, voltage.

 

PWRFACTOR_#(NUM/STR):

Number and string format, power factor.

 

STATUS_MESSAGE_#(STR):

Display the power, energy, current, voltage, and power factor of selected sensor.

--------------------------------------------------------------------------------------

Copyright 2015, HouseLogix, Inc.

All Rights Reserved.