Software Thermostat

Partner: Domaudeo
Full-featured thermostat emulator to build an HVAC system from any devices.
Login to view pricing

Domaudeo Software Thermostat v1.0.3

This driver emulate a fully fonctionnal thermostat without the need to use an actual real hardware thermostat.

You need to bind one of the available temperature sources to get the base temperature value to serve as the "Current Temperature" on the thermostat.

Temperature source can be:

- Card Access Contact or Relay

- Card Access Wireless Anywhere Button

- Quasar Electronic 4-channel Temperature Logger board (model 3145) https://www.quasarelectronics.co.uk/Item/3145-ds18s20-computer-serial-temperature-data-logger

- Any device that repport temperature into a variable using the WRITE_TEMPERATURE variable to put the value in.

Then you can control any devices via Relay, Button Link or Programming based on thermostat trigger like Heat/Cool/Fan.

The thermosat interface is available on any Navigator devices or mobile devices that run the Control4 app.

 

This driver comes with FREE 72h trial, enabled when added to a project.

 

 

Application example:

Use a Card Access Relay to gather temperature value in the room, connect a relay or a 220v switch to a baseboard heater and use this thermostat driver to monitor the room temperature and define Set Points that will make the baseboard operate when the room temperature fall beyond a certain point.

Connect a window Air Conditionner to a Control4 plug-in relay module and have the air conditionner completely controlled via your home automation system. The Domaudeo Software Thermostat will manage any cooling, heating anf fan devices together with the ease of a simple HVAC thermosat.

Driver License:  Site (one required per project)

 

Domaudeo Software Thermostat v1.0.1

 

This driver emulate a fully fonctionnal thermostat without the need to use an actual real hardware thermostat.

 

You need to bind one of the available temperature sources to get the base temperature value to serve as the "Current Temperature" on the thermostat.

 

Temperature source can be:
- Card Access Contact or Relay
- Card Access Wireless Anywhere Button
- Quasar Electronic 4-channel Temperature Logger board (model 3145)
- Any device that repport temperature into a variable using the WRITE_TEMPERATURE variable to put the value in.

 

Then you can control any devices via Relay, Button Link or Programming based on thermostat trigger like Heat/Cool/Fan.

 


Limitations:
- Scheduling and Hold Mode does not work